More Views

YN 622C TX

Be the first to review this product

To buy call us on +91-84689-84689

Rs. 3,299
YN 622C TX


Control multiple flashes equipped with the YN-622C E-TTL II transceiver with the YN-622C-TX E-TTL II Wireless Flash Controller from Yongnuo. Compatible with Canon E-TTL II cameras, this controller slides directly into the hot shoe and utilizes a 2.4 GHz frequency with a range of 328' to trigger the remote flashes. The controller also has TTL, manual, and multi flash modes available for full creative control. Additionally, it can utilize 7 channels and 3 groups for setting up multiple flash units easily and efficiently.

The YN-622C-TX utilizes an LCD screen to display settings and allow users to make adjustments. On the device is also an AF assist beam to help in low-light conditions. Multiple sync modes are available for more specific needs or effects, including 1st and 2nd curtain sync. A high speed sync mode will help in bright lighting conditions and for stopping motion with a maximum speed of 1/8000 second. A built-in mini-USB port enables firmware updates to be installed, and the device runs on 2 AA batteries.

  • LCD screen display, multi-buttons quick operation
  • The firmware can be upgraded through the USB interface
  • Supports wireless shutter release function
  • The focal length (zoom) of the A/B/C three groups of flash can be adjusted separately
  • Equipped with AF focus assist light (can be disabled)
  • Grouping flash mode: e-TTL/Manual flash/Super sync
  • Supports mixed use of the A/B/C three groups of flashes with e-TTL, Manual flash, or Super sync flash mode
  • The exposure compensation or flash output of A/B/C three groups of flashes can be adjusted separately
  • Shutter Sync: first curtain sync, second curtain sync and FP high-speed sync, the highest sync speed is 1/8000s
  • Supports exposure compensation, flash value lock function (FVL)
  • Supports simulate (modeling) flash, red-eye reduction flash
  • Supports flash zooming (auto)
  • Super Sync (SS) time delay adjustment, for higher x-sync speed than the camera allows
  • Settings saved automatically
  • The flash sync signal can be inputted through the PC port
  • Supports the basic flash trigger (max sync speed is 1/250s) of a standard hot shoe (non Nikon body)
  • *The above functions need to be used with the YN-622C transceiver.


Frequency :2.4 GHz

Range :328' (100 m)

TTL Dedication E-TTL II

Channels             7

Groups                 3 (A, B, C)

Flash Modes      TTL, manual, multi

Sync Mode         1st curtain, 2nd curtain, high-speed sync

Max Sync Speed               1/8000 sec

Interface             Triggering: Hot shoe, PC port

Shutter Release: 2.5mm

Firmware Upgrade: mini-USB

Battery                 2 x AA battery

Battery Life        Standby: 120 hours

Dimensions        3.5 x 2.1 x 1.5" (9.0 x 5.3 x 3.9 cm)

Weight                 2.9 oz (82 g)

Packaging Info

Package Weight               0.4 lb

Box Dimensions (LxWxH)            5.4 x 4.2 x 2.1"

No reviews posted yet for this product.

Write a review